So, you wanna build something awesome? First, grab some popcorn and watch the assembly videos of your chosen kit from start to finish - trust us, it'll help you make sense of the assembly sequence. Assembly may require prior building experience, but nothing that cannot be learned on the job. 

Build with your choice of glue from good ol’ hot glue, E6000, BSI Foam-Cure to Foam-Tac. Use hot glue sparingly and build in sections as that will keep the airplane light. For any sanding, you can use a 60 grit followed by 120 grit sandpaper for shaping the leading edges of the main wing.

The kits include laser-cut EPP foam, plywood motor mount, 1/8" plywood wing spars, and piano wire pushrods with plastic control horns. Many of our builders already have 3mm carbon spars that they usually swap out for the plywood wing spars.

And, pro tip: plan ahead, folks! Think about how you'll install those servos and linkages before you start gluing things together. It'll save you some serious heartache (and glue-stained fingers) down the line!

Happy building!